In this machines, steel bullets (shot-shot) after entering the centrifugal turbines of the device are accelerated and sprayed on the surface of the part, which due to these high-speed and consecutive collisions of the bullets, shooting operations are performed in these devices.
The shot blasting machines can be used for performing the following operations:
- Paint removal, sand removal and paint stripping internal and external surfaces of work-pieces.
- Layer removal of various forged work-pieces surfaces
- Roughening surfaces of work-pieces (Using grit) for optimization of enameling and Teflon coating for better longevity and quality.
- Preparation of surfaces for performing various industrial and decorative or paint electroplating.
- Cleaning and preparing work-pieces (Shot Blasting)
|Effective workpiece dimensions||W : 2000 mm – H : 2200 mm – L : 12000 mm|
|Number of machine turbines||10 Turbine|
|Power of machine turbines||(7.5 OR 11) Kw - Motors 300 rpm
(Simens OR Electrogene)
|Machine's control system||PLC – FATEK|
|Shot collection and transmission system||3 Screw + Elevator – Automatic by PLC control|
|dust collection system||Automatic by Exhaust fan|
|Dust suction power of Machine||15 Kw – 3000 rpm|
|Number of Machine's dust collection filters||10 Filter – Cartridge|
|Set of input and output conveyor tables||7000 mm X 4 Set (2.2) Kw|
|Shot storage tank capacity||6 Ton|
|Degree of Surface roughness||Sa2 – Sa2 1/2|
|turbine launch angle adjustment||7 º - Manual|
|Panel's degree of protection||IP 54|
|Machine’s Electric Power Consumption||Nominal Current @ Max. loud: 380v – 50Hz 3ph – 110 A|
|turbine power supply system||Automatic Pneumatic Jacks by PLC control|
|Overall Machine's Dimension (mm)||W: 7950 mm, H: 10250 mm, L :8000 mm
A :(Height from ground) 7550
|Overall Machine's Weight (kg)||11900 kg|
|Additional options||A. Equipped with a sensor to detect the entry of the workpiece to start and stop the turbines and prevent shot wasting
B. Top cabin equipped with puzzled anti-wear and replaceable cast iron
C. The lower cabin is equipped with puzzled anti-wear and replaceable anti-wear tires
D. Cabin rollers equipped with puzzled anti-wear cover and replaceable
E. The system has 3 rows of anti-wear curtains at the entrance and exit of the tunnel
F. Equipped with operation program for screws and elevators after turning off the machine in order to collect shots and prevent their accumulation and tightening in turbines and machine parts