

description
The machine consists of cart, column, boom, welding arm & tool carriage, mechanical welding torch tracing device, and electrical control system.
You can order this device with your preferred options ,from the below link.
DETAILS
The machine consists of cart, column, boom, welding arm & tool carriage, mechanical welding torch tracing device, and electrical control system. The cart, column and boom are the framework of the machine. Welding arm and tool carriage are installed on boom, welding gun mechanical tracking device is used to support welding head and adjust the location of welding tip. There are several groups of idler wheels on the tool carriage to closely attach with the guiding rails for upper & lower and left & right traveling. Two groups of driving devices will be used to drive the traveling of welding arms in upper, lower, left and right direction. The mechanical welding torch tracing device is installed at the lower part of welding arm and the wire feeding device of welding head is installed at the upper part, which can assure the welding tip be aimed at the welding seam, but kept with certain clearance. Additionally, the manual left-right adjusting device for welding torch is equipped. The electrical control system consists of electrical control box and operation panel. Through this system, all operations of machine, adjustment of welding parameters of welding machine and switches of flux recovery machine will be controlled and executed.
Subjects | Descriptions |
---|---|
Minimum and maximum working dimensions | Min: 200 mm – Max: 1500 mm |
Minimum and maximum working length | Min: 250 mm – Max: 12000 mm |
Machine's Linear movement speed | Vc:2410 Vr(max): 320 Vh(max): 390 |
Input Current | 40 A |
Input Voltage | 380 V ~ 50 Hz0.5 – 20 for Stainless Steel (Recommended) / up to 35 (Max cutting range) 0.5 – 15 for Aluminum (Recommended) / up to 25 (Max cutting range)0.5 – 20 for Stainless Steel (Recommended) / up to 35 (Max cutting range) 0.5 – 15 for Aluminum (Recommended) / up to 25 (Max cutting range |
Machine's control system | Inverter - Delta |
Panel's degree of protection | IP52 |
Machine’s Electric Power Consumption | Nominal Current @ Max. loud: 380v – 50Hz 3ph – 110 A |
Welding's power supply | KARA TCR1250 A |
Welding powder suction system | KARA Suction |
Machine's linear movement system | Motor & Gearbox + rack pinion, 2 sides |
Welding nozzles guidance system | Automatic Proximity sensor for each side |
Welding powder tank capacity | 50 Kg |
Capacity of welding wire pulleys | 35 Kg |
Power of welding wires | Wire 2.4 mm ~ 5 mm |
Overall Machine's Dimension (mm) | W: 2136 mm, H: 4200 mm, L: 1568 mm |
Overall Machine's Weight (kg) | 2050 |